Nora 2 uses high capacity and quality li-ion battery packs, professionally manufactured with appropriate protection circuitry. Our cell packs are produced in an industry standard flat pack 2P configuration; no fancy layouts to tie you into our product.
As a consequence Nora battery pack failures are extremely rare, and many years reliable service is typical.
Knowing some fundamentals about your battery pack will help to ensure that you maximise the life of the packs. While li-ion battery packs are fairly robust, they are potentially susceptible to damage particularly from severe impact, temperature and water ingression. Our lamps have been designed to best protect the battery packs in operation, while maintaining a practical helmet mounted solution for underground use. If carrying spare packs take care to avoid severe impact and water as they will potentially break. A hard case waterproof container is advised.
Note - li-ion battery packs will shut down at a set low voltage level (around 2.75v). However, Nora 2 has been designed to deliver a very long tail of low light from fundamentally flat battery packs, minimizing the risk of being left without light.
Although the charging algorithm for li-ion cells is relatively complex, this is sorted out by the Nora charger and battery pack circuitry, and consequently the charger is a simple plug in and go solution. Red light, charging. Green light, fully charged and automatic charging shut off. Battery packs can be part discharged or part charged without consequence. There is no rapid high current charge option for li-ion packs. We recommend using the 1.5 Amp Nora mains charger. Do not use chargers in excess of this rating. Although charging is automatically shut off on completion, it is always advisable to disconnect battery packs from chargers when charging has finished.
The capacity of li-ion batteries is reduced with age. The chemical process that relates to this is accelerated with increased temperature and charge level. To realise maximum battery life, cell packs should be stored around half charge and in a cool and dry environment (around 15 degC, do not freeze). Under no circumstances should battery packs be left discharged for an extended period, in order to avoid self discharge below 2.5v and permanent damage.
Battery and lamp connectors are polarized so correct polarity is ensured. Battery connections should be made outside of the box, and battery pack orientated in battery box, with wires and connectors down inside wall of box (opposite side to cable entry). Battery is best inserted with wires from heat shrunk battery pack positioned to the bottom of the box. Take reasonable care when fitting battery pack that battery and lamp wires do not get trapped / damaged, and also when charging. We suggest using Nora vinyl stickers (supplied) to mark battery pack and charger, in order to avoid any potential mix ups with similar equipments. To maintain good water integrity, high viscosity silicone grease can be used on battery box O ring.
The JST connectors used on Nora 1 and Nora 2 battery packs are fairly robust, and the industry standard battery connectors for radio control equipment etc. They are ideal for making battery connections in a compact box. However they are not unbreakable; hence why we have flagged this up on the website and in the Nora 2 instructions We recommend that you take a degree of care, and be a little sympathetic when connecting / disconnecting battery packs, else you will need to either repair them, or purchase a new battery pack (we do not repair battery packs; they are manufactured for us, as manufacturing or working on li-ion batteries in this day and age is a sticky one, and best left in our opinion to pro battery pack manufacturers).
The Nora 2 is compatible with 3.7v li-ion, and 3 series cell NiMh / alkaline (3xAA holder). The Nora is not compatible with high voltage li-ion packs, typically ranging from 7.4v to 14.8v, connection to which could result in damage. In order to maximise efficiency, Nora 2 has limited protection against high voltage and reverse polarity. Always ensure correct battery polarity, to avoid potential damage to lamp. Take particular care when using AA holder, that the battery polarity is correct, and to avoid damage to lamp connecting cable within battery box.
We do not take responsibility for injury to persons or damage to property from cells or chargers. These should be used and charged under supervision, stored safely, appropriately maintained and correctly disposed of if there is any suspicion that they have been damaged.